Morse Code and You

Morse Code and You

Author: Onno (VK6FLAB) November 30, 2019 Duration: 4:46
Foundations of Amateur Radio

With the growing availability of new ways of communicating across the globe, from digital voice such as CODEC2, through weak signal modes like WSPR, JT65, MSK144 and FT4 to name a few, with Internet linked radio such as Brandmeister and DMR and the newly granted access to all Australian amateurs to all those modes, it's easy to overlook the one mode that started this adventure.

Morse Code.

It's no longer required to obtain your amateur license, so if that was putting you off from getting your license, you can breathe easy and get right to it.

Among all the shiny new modes Morse Code continues to hold its own and for good reason. It's simple, reliable, has an amazing signal to noise ratio and if you're driving in your car and you're stuck without a Morse Key, you can always just whistle into your radio.

If you've been following my journey through the hobby you'll know that I've been attempting to learn Morse Code. For a while now. It's been a challenge, more so since I spend less and less time in a car and more and more time behind my keyboard appeasing my clients. That's not to say that I've forgotten, just that what I've tried so far has eluded success.

A little while ago I received an email from a friend, Shaun VK6BEK who let me know that there was a discussion happening on a mailing list he was a member of and in that discussion I cracked a mention. Being the shy and retiring type I had to have a look for myself. To read the message I had to join, which is fine, since Charles NK8O has been bugging me to do that for years, well perhaps not bugging, perhaps keying me - hi hi. Turns out that the Straight Key Century Club, the SKCC, was having a recurring discussion about the topic of Head Copy or Head Reading.

To give you a sense of what that is, consider what I'm saying to you right now. It doesn't matter if you're reading this in an eBook on your Kindle, reading it on an email or online, listening to it on your local repeater, or via your favourite podcast player, for each of those the same process is happening.

You are not absorbing individual letters or sounds, but getting the meaning from the entire structure of a sentence. For uncommon words you might need to calibrate your brain, but for the most part you're just bobbing along understanding what I'm saying.

In essence you're doing the equivalent of Head Copy.

In Morse Code the same can be achieved. Ultimately it's a language, a tonal one, but a language none the less. Hearing the individual dits and dahs, followed by letters, words and sentences, eventually you'll get to a point where it all just flows.

I speak a few different languages, a curse or a blessing depending on your point of view. It means that I've become exposed to how language is built up. Initially when you hear a new language your brain is trying hard to figure out where the individual sounds belong, which sound belongs to which word, how a word begins and ends, how you make a plural, all the things you take for granted after you've learnt a language.

In Morse that is no different.

Within that context of discussing Head Copy, Gwen NG3P mentioned that she used the text edition of this podcast to convert into a Morse Code MP3 file so she could learn to hear Morse and bring them with her on her mobile phone.

Gwen and I had similar aims. In the past I'd done the same with a book, Huckleberry Finn if I recall, as well as random letters and also the ARRL Morse practice downloads, but nothing seemed to work for me.

For Gwen my podcast was an obvious source, so much so that I completely missed it, since they are short and on the topic of amateur radio. The language in use is likely going to be things that you'll hear on air and there's a smattering of callsigns, so all good.

Long story short, I spent last week converting all 454 episodes of the podcast to Morse Code for your Head Copy practice enjoyment. They're encoded at 25 WPM, or Words Per Minute and the tone is 600 Hz. I even put them online and made it possible for you to add them to your podcast player.

Best part?

I now get to hear Morse Code at a pace that I'm looking for, on a topic that's relevant and I have been receiving plenty of emails from others who are just as excited as I am.

You can find these episodes on the podcast homepage at http://vk6flab.com. Let me know how you go.

I'm Onno VK6FLAB


For anyone curious about the crackle of a distant voice emerging from the static or the thrill of making a contact across the globe using nothing but radio waves, Foundations of Amateur Radio offers a friendly, steady guide. Hosted by Onno (VK6FLAB) from Australia, this long-running podcast acts as a companion for newcomers navigating the initial, often overwhelming, steps into this vast hobby. Each episode deliberately unpacks a single facet of amateur radio, breaking down technical concepts, equipment, and operating practices into digestible pieces. You'll hear practical advice on how to get started, find your place within the global community, and discover which of the hobby's countless avenues-from building antennas to satellite communication or emergency service-might spark your passion. It’s not about dry theory; it’s about demystifying the process and sharing the genuine rewards that keep enthusiasts engaged for a lifetime. Having evolved from its earlier incarnation in 2011, this podcast builds from the ground up, week by week, creating a solid resource that grows with you. Tune in for a down-to-earth conversation that makes the airwaves feel a little more accessible and a lot more inviting.
Author: Language: English Episodes: 579

Foundations of Amateur Radio
Podcast Episodes
What's in an S-unit? [not-audio_url] [/not-audio_url]

Duration: 10:43
Foundations of Amateur Radio The other day fellow amateur Randall VK6WR raised an interesting question. Using his HP 8920A RF Communications Test Set, which you might recall from our adventures in measuring radio harmoni…
Where is the spark .. gap? [not-audio_url] [/not-audio_url]

Duration: 8:35
Foundations of Amateur Radio The thing I love most about this amazing hobby of amateur radio is the sheer size of the community and the depth of knowledge that comes with it. Case in point, the other day I mentioned the…
Bald Yak 18: Everything Everywhere All at Once? [not-audio_url] [/not-audio_url]

Duration: 7:02
Foundations of Amateur Radio The other day I was playing around with RDS, or Radio Data System, it's a digital signal that's often embedded in a commercial broadcast FM transmission. Among other things it contains inform…
Bald Yak 17: Adventures in Radio Data Systems [not-audio_url] [/not-audio_url]

Duration: 5:01
Foundations of Amateur Radio While spending some quality time discovering what I don't know about GNU Radio, I explored the notion of attempting to at least understand a little more about how an FM signal works. Dependin…
Bald Yak 16: How do you decode FM? [not-audio_url] [/not-audio_url]

Duration: 6:51
Foundations of Amateur Radio How do you make a hole? That's a pretty straightforward kind of question, and by the time this sentence is finished, there's going to be at least as many answers as people who considered it.…
One step forward ... three steps back. [not-audio_url] [/not-audio_url]

Duration: 5:38
Foundations of Amateur Radio Still excited from my minor victory in discovering a missing puzzle piece associated with the project I'm working on, I spent the past week introducing my head, if not literally, at least fig…
Bald Yak 15, Playing with Radio .. now with software [not-audio_url] [/not-audio_url]

Duration: 6:48
Foundations of Amateur Radio A little while ago I discussed a lovely article by programmer, artist, and game designer "blinry" called "Fifty Things you can do with a Software Defined Radio". This week it occurred to me t…
How to go about documenting your setup? [not-audio_url] [/not-audio_url]

Duration: 5:22
Foundations of Amateur Radio How to go about documenting your setup? Possibly the single most important thing that separates science from "fiddling around" is documentation. Figuring out how to document things is often n…
Transmitting into a dummy load .. for a year .. on purpose. [not-audio_url] [/not-audio_url]

Duration: 8:34
Foundations of Amateur Radio Just under a year ago I started an experiment. I set-up a beacon for WSPR, or Weak Signal Propagation Reporter, transmitting at 200 mW into a dummy load using eight bands between 80m and 10m.…
How to become a radio amateur today? [not-audio_url] [/not-audio_url]

Duration: 6:02
Foundations of Amateur Radio The other day a fellow amateur revealed that they qualified for membership of the QWCA, the Quarter Century Wireless Association .. twice over .. there may have been some innocent whistling i…