Planning for an outing

Planning for an outing

Author: Onno (VK6FLAB) September 14, 2019 Duration: 3:19
Foundations of Amateur Radio

Planning for an outing

Recently I had the opportunity to use a new radio whilst I was far away from my shack. It wasn't unexpected, I took the radio with me, planned for the experience and packed light with intent.

My original packing included a 10m length of coax, my analyser, some antenna weights, wire, rope, power leads, BNC adaptors, barrel connectors and a balun. Total weight came in at about 7kg. More than double the weight of the radio itself. The biggest weight came with the coax, so that stayed home. Got rid of all the "what-if" adaptors, dumped the antenna weights, dumped the balun and the analyser, added an un-un, and a multimeter and came in at just under 5kg.

The idea was to operate from the car, chuck a long-wire into a tree and make noise.

Then I got to where I was going and learnt that there were lots of SOTA peaks nearby. If you're not familiar with SOTA, it stands for Summits On The Air and it's a way of encouraging people to go out and make noise while also encouraging others to listen out for your activation of a nearby peak. As an aside, it's separate but closely related to WWFF, World Wide Flora and Fauna, since peaks are often in National Parks and who wouldn't want an excuse to activate two things in one sitting?

One of the most basic rules of SOTA is that all equipment must be operated from a portable power source (batteries, solar cells, etc). Operation is expressly forbidden using permanently installed power sources or fossil-fuel generators of any kind.

That of course means that using the battery in a car is not allowed, though I suppose I could unbolt the battery from the engine bay, but I'm pretty sure that the hire-car company would frown on that plan.

I set about attempting to find out how much power the radio actually draws at 5 Watt, and how much battery I'd need to activate a peak.

Given that my shack wasn't where I was, I couldn't just plug it into my fancy power supply and read the power draw from the display, should have done that before I left. Shoulda, Coulda, Woulda. I resorted to asking the community, but that was dependent on the kindness of strangers.

Another hitch was the battery. I came up with the brilliant plan to use one of those high-capacity jump start boxes, 18Ah or so. Picked the one I liked the best, figured out if I could ship it back to my shack on return, since it likely couldn't fly, both from a weight and a dangerous goods perspective and found a supplier locally - well 108km away - and then, me being me, I downloaded the user manual, and learnt that what I wanted to do, power my radio, was expressly, strongly, not recommended, fear of explosion and the like.

Planning foiled.

I still wanted to operate, contest to be attempted, SOTA be damned. How could I operate and not fear that I'd be draining the car battery?

A cigarette lighter mounted Volt meter!

So, now I can connect the radio directly to the battery in the car and check the voltage whilst I'm operating.

Now all I need is a parking spot with a nearby tree or gazebo and no noisy neighbours or overhead power lines.

I'll let you know how I go.

I'm Onno VK6FLAB


For anyone curious about the crackle of a distant voice emerging from the static or the thrill of making a contact across the globe using nothing but radio waves, Foundations of Amateur Radio offers a friendly, steady guide. Hosted by Onno (VK6FLAB) from Australia, this long-running podcast acts as a companion for newcomers navigating the initial, often overwhelming, steps into this vast hobby. Each episode deliberately unpacks a single facet of amateur radio, breaking down technical concepts, equipment, and operating practices into digestible pieces. You'll hear practical advice on how to get started, find your place within the global community, and discover which of the hobby's countless avenues-from building antennas to satellite communication or emergency service-might spark your passion. It’s not about dry theory; it’s about demystifying the process and sharing the genuine rewards that keep enthusiasts engaged for a lifetime. Having evolved from its earlier incarnation in 2011, this podcast builds from the ground up, week by week, creating a solid resource that grows with you. Tune in for a down-to-earth conversation that makes the airwaves feel a little more accessible and a lot more inviting.
Author: Language: English Episodes: 579

Foundations of Amateur Radio
Podcast Episodes
What's in an S-unit? [not-audio_url] [/not-audio_url]

Duration: 10:43
Foundations of Amateur Radio The other day fellow amateur Randall VK6WR raised an interesting question. Using his HP 8920A RF Communications Test Set, which you might recall from our adventures in measuring radio harmoni…
Where is the spark .. gap? [not-audio_url] [/not-audio_url]

Duration: 8:35
Foundations of Amateur Radio The thing I love most about this amazing hobby of amateur radio is the sheer size of the community and the depth of knowledge that comes with it. Case in point, the other day I mentioned the…
Bald Yak 18: Everything Everywhere All at Once? [not-audio_url] [/not-audio_url]

Duration: 7:02
Foundations of Amateur Radio The other day I was playing around with RDS, or Radio Data System, it's a digital signal that's often embedded in a commercial broadcast FM transmission. Among other things it contains inform…
Bald Yak 17: Adventures in Radio Data Systems [not-audio_url] [/not-audio_url]

Duration: 5:01
Foundations of Amateur Radio While spending some quality time discovering what I don't know about GNU Radio, I explored the notion of attempting to at least understand a little more about how an FM signal works. Dependin…
Bald Yak 16: How do you decode FM? [not-audio_url] [/not-audio_url]

Duration: 6:51
Foundations of Amateur Radio How do you make a hole? That's a pretty straightforward kind of question, and by the time this sentence is finished, there's going to be at least as many answers as people who considered it.…
One step forward ... three steps back. [not-audio_url] [/not-audio_url]

Duration: 5:38
Foundations of Amateur Radio Still excited from my minor victory in discovering a missing puzzle piece associated with the project I'm working on, I spent the past week introducing my head, if not literally, at least fig…
Bald Yak 15, Playing with Radio .. now with software [not-audio_url] [/not-audio_url]

Duration: 6:48
Foundations of Amateur Radio A little while ago I discussed a lovely article by programmer, artist, and game designer "blinry" called "Fifty Things you can do with a Software Defined Radio". This week it occurred to me t…
How to go about documenting your setup? [not-audio_url] [/not-audio_url]

Duration: 5:22
Foundations of Amateur Radio How to go about documenting your setup? Possibly the single most important thing that separates science from "fiddling around" is documentation. Figuring out how to document things is often n…
Transmitting into a dummy load .. for a year .. on purpose. [not-audio_url] [/not-audio_url]

Duration: 8:34
Foundations of Amateur Radio Just under a year ago I started an experiment. I set-up a beacon for WSPR, or Weak Signal Propagation Reporter, transmitting at 200 mW into a dummy load using eight bands between 80m and 10m.…
How to become a radio amateur today? [not-audio_url] [/not-audio_url]

Duration: 6:02
Foundations of Amateur Radio The other day a fellow amateur revealed that they qualified for membership of the QWCA, the Quarter Century Wireless Association .. twice over .. there may have been some innocent whistling i…