DIY Deep Watering
Anarchy in the Garden™ is a mixture of DIY ingenuity and tried-and-true old timey techniques with a punk attitude. It’s not your grandma’s grandma’s garden. I’m not trying to reinvent the wheel; just give you my perspective, share my techniques, what works and what doesn’t. Most importantly I’ll share my failures so you don’t screw up 160 soil blocks like I did.
So here’s a short slide show on the high tech deep watering system I employ. A video would have been better but the mic on my camera is useless. Directions:
Step 1: Locate a 1 gallon nursery container (you know you have a ton in your shed).
Step 2: Drill ½ in holes (or get the husband to do it like I do) all around the container up to the lip.
Step 3: Dig a hole where the container will be “installed.” I usually shove one of these between two tomato plants.
Step 4: Fill the container with water. Y voila!
Why do I do this? Good question. Firstly, this is the only way I’ve ever watered my tomatoes. Second, I don’t have a fancy drip irrigation system. That would just be too easy.
These watering containers slowly allow water to seep through the holes and directly to the plant’s roots. Establishing a strong root system equals happy healthy long producing plants. Did I mention I have tomatoes long into December?
Also, it frees up your hands. I’m a multi-tasker. I can’t just do one thing at a time. Dump the hose into the watering container and walk away; tend other garden chores. Keep an eye on the water level, once it reaches the top toss the hose into the next container. You can even splash a little Sea Magic Organic Seaweed Growth Activator like I do. Have fun!