How does a waterfall display work?

How does a waterfall display work?

Author: Onno (VK6FLAB) May 19, 2018 Duration: 3:20
Foundations of Amateur Radio

With computers becoming more and more ensconced within the confines of our radio shack the variety of information available is increasing regularly. The introduction of a waterfall display has dramatically simplified the process of detecting what the activity level is on a particular band.

If you've never seen a waterfall display, it's often a real-time, or nearly real-time display of radio activity. Leaving aside the mechanics of how this comes about, or how much you see, generally it's presented as a picture that changes over time.

In reality it's a very compact way of showing a lot of information.

You can think of it as a chart, showing the horizontal axis as frequency, the vertical axis as time and the colour as signal strength. So as you look from left to right you'll look at higher and higher frequencies. For example, the left side might be 7 MHz and the right side might be 7.3 MHz. Halfway along is 7.150 MHz.

Similarly, now, as in zero seconds ago is at the top of the chart and 1 minute ago is lower. Depending on how fast you've set it to update the whole screen might represent 10 seconds, 10 minutes or 10 hours of information, entirely flexible, entirely configurable, entirely arbitrary.

If you think of the colour black as having no signal strength and the colour red being maximum signal strength, then the brighter the colours, the more signal there is.

A morse code signal might turn up as a series of dits and dahs running down the screen, with the oldest one being at the bottom and the newest one at the top.

An AM signal might show up as a thick line with a bright colour, that's a high signal strength in the middle and lighter colours or low signal strength towards the edges.

Every mode has its own visual characteristic and there are even modes that allow you to read information within a waterfall display.

One of the other things you'll see in a waterfall display is strange artefacts, things like a diagonal line for example.

If you think of what a diagonal line represents as a radio signal, it's something that has a strong signal at a particular time and frequency. A moment later it's changed frequency and a moment later it's done it again. The steepness of the line is dependent on two things, the speed that the frequency changes and the speed that the waterfall is updating.

Before waterfall displays, the way you'd experience such a signal would be something that flashes up as a low to high swoop, or a high to low swoop, depending on your listening mode and the direction of the frequency change.

So what is that signal?

Well, it's likely to be something called an Ionospheric Sounder. It does what you think it does. Ping the ionosphere across multiple frequencies. The station doing this is listening for a return echo to see if the ionosphere is reflective for that particular frequency at that particular moment. The information can be used to create a map of what the ionosphere is doing right now, which in turn is used to figure out what frequency to use to make a contact.

I should also mention that there is a signal identification wiki which shows and plays various identified and unidentified radio signals, hours of fun for the family.

I'm Onno VK6FLAB


For anyone curious about the crackle of a distant voice emerging from the static or the thrill of making a contact across the globe using nothing but radio waves, Foundations of Amateur Radio offers a friendly, steady guide. Hosted by Onno (VK6FLAB) from Australia, this long-running podcast acts as a companion for newcomers navigating the initial, often overwhelming, steps into this vast hobby. Each episode deliberately unpacks a single facet of amateur radio, breaking down technical concepts, equipment, and operating practices into digestible pieces. You'll hear practical advice on how to get started, find your place within the global community, and discover which of the hobby's countless avenues-from building antennas to satellite communication or emergency service-might spark your passion. It’s not about dry theory; it’s about demystifying the process and sharing the genuine rewards that keep enthusiasts engaged for a lifetime. Having evolved from its earlier incarnation in 2011, this podcast builds from the ground up, week by week, creating a solid resource that grows with you. Tune in for a down-to-earth conversation that makes the airwaves feel a little more accessible and a lot more inviting.
Author: Language: English Episodes: 579

Foundations of Amateur Radio
Podcast Episodes
How much does your coax and antenna matter? [not-audio_url] [/not-audio_url]

Duration: 7:15
Foundations of Amateur Radio Recently I explained some of the reasons why I've shifted to using dBm to discuss power. You might recall that 1 Watt is defined as 1,000 mW and that's represented by 30 dBm. 10 Watts is 40 d…
Gadgets on Demand [not-audio_url] [/not-audio_url]

Duration: 5:01
Foundations of Amateur Radio The other day I went looking for a software defined radio or SDR for HF. This happened because all such devices on my desk are rated at higher frequencies and I've still not managed to fix th…
All the power in the observable universe expressed in milliwatts ... [not-audio_url] [/not-audio_url]

Duration: 6:50
Foundations of Amateur Radio If you've been following my amateur radio journey, you'll have likely noticed that I've been straying from the fold. The words I use for power have been changing. I've reduced references to W…
Between decibels and milliwatts ... [not-audio_url] [/not-audio_url]

Duration: 5:27
Foundations of Amateur Radio Between decibels and milliwatts ... As you might recall, I've been working towards using a cheap $20 RTL-SDR dongle to measure the second and third harmonic of a handheld radio in an attempt…
Wet and Blue adventures with coax ... [not-audio_url] [/not-audio_url]

Duration: 5:04
Foundations of Amateur Radio Over the weekend a friend of mine convinced me to help plant some trees. Mind you, I was told that this was going to be a blue tree painting day. The Blue Tree Project is now a global awarene…
Checking attenuation numbers ... [not-audio_url] [/not-audio_url]

Duration: 6:35
Foundations of Amateur Radio Before we start I should give you fair warning. There are many moving parts in what I'm about to discuss and there's lots of numbers coming. Don't stress too much about the exact numbers. In…
How much attenuation is enough? [not-audio_url] [/not-audio_url]

Duration: 5:58
Foundations of Amateur Radio Recently I had the opportunity to use a piece of professional equipment to measure the so-called unwanted or spurious emissions that a transceiver might produce. In describing this I finished…
Starting to measure spurious emissions ... [not-audio_url] [/not-audio_url]

Duration: 6:30
Foundations of Amateur Radio At a recent local HAMfest we set-up a table to measure second and third harmonic emissions from any handheld radio that came our way. The process was fun and we learnt lots and in due course…
Gathering Data rather than Opinions ... [not-audio_url] [/not-audio_url]

Duration: 5:22
Foundations of Amateur Radio There's nothing quite as satisfying as the click of a well designed piece of equipment. It's something that tickles the brain and done well it makes the hairs stand up on the back of your nec…
Jumping into the unknown ... [not-audio_url] [/not-audio_url]

Duration: 6:29
Foundations of Amateur Radio If you walk into your radio shack and switch on a light, the result is instantaneous, one moment it's dark, the next it's not. What if I told you that as immediate as it appears, there is act…