How does a waterfall display work?

How does a waterfall display work?

Author: Onno (VK6FLAB) May 19, 2018 Duration: 3:20
Foundations of Amateur Radio

With computers becoming more and more ensconced within the confines of our radio shack the variety of information available is increasing regularly. The introduction of a waterfall display has dramatically simplified the process of detecting what the activity level is on a particular band.

If you've never seen a waterfall display, it's often a real-time, or nearly real-time display of radio activity. Leaving aside the mechanics of how this comes about, or how much you see, generally it's presented as a picture that changes over time.

In reality it's a very compact way of showing a lot of information.

You can think of it as a chart, showing the horizontal axis as frequency, the vertical axis as time and the colour as signal strength. So as you look from left to right you'll look at higher and higher frequencies. For example, the left side might be 7 MHz and the right side might be 7.3 MHz. Halfway along is 7.150 MHz.

Similarly, now, as in zero seconds ago is at the top of the chart and 1 minute ago is lower. Depending on how fast you've set it to update the whole screen might represent 10 seconds, 10 minutes or 10 hours of information, entirely flexible, entirely configurable, entirely arbitrary.

If you think of the colour black as having no signal strength and the colour red being maximum signal strength, then the brighter the colours, the more signal there is.

A morse code signal might turn up as a series of dits and dahs running down the screen, with the oldest one being at the bottom and the newest one at the top.

An AM signal might show up as a thick line with a bright colour, that's a high signal strength in the middle and lighter colours or low signal strength towards the edges.

Every mode has its own visual characteristic and there are even modes that allow you to read information within a waterfall display.

One of the other things you'll see in a waterfall display is strange artefacts, things like a diagonal line for example.

If you think of what a diagonal line represents as a radio signal, it's something that has a strong signal at a particular time and frequency. A moment later it's changed frequency and a moment later it's done it again. The steepness of the line is dependent on two things, the speed that the frequency changes and the speed that the waterfall is updating.

Before waterfall displays, the way you'd experience such a signal would be something that flashes up as a low to high swoop, or a high to low swoop, depending on your listening mode and the direction of the frequency change.

So what is that signal?

Well, it's likely to be something called an Ionospheric Sounder. It does what you think it does. Ping the ionosphere across multiple frequencies. The station doing this is listening for a return echo to see if the ionosphere is reflective for that particular frequency at that particular moment. The information can be used to create a map of what the ionosphere is doing right now, which in turn is used to figure out what frequency to use to make a contact.

I should also mention that there is a signal identification wiki which shows and plays various identified and unidentified radio signals, hours of fun for the family.

I'm Onno VK6FLAB


For anyone curious about the crackle of a distant voice emerging from the static or the thrill of making a contact across the globe using nothing but radio waves, Foundations of Amateur Radio offers a friendly, steady guide. Hosted by Onno (VK6FLAB) from Australia, this long-running podcast acts as a companion for newcomers navigating the initial, often overwhelming, steps into this vast hobby. Each episode deliberately unpacks a single facet of amateur radio, breaking down technical concepts, equipment, and operating practices into digestible pieces. You'll hear practical advice on how to get started, find your place within the global community, and discover which of the hobby's countless avenues-from building antennas to satellite communication or emergency service-might spark your passion. It’s not about dry theory; it’s about demystifying the process and sharing the genuine rewards that keep enthusiasts engaged for a lifetime. Having evolved from its earlier incarnation in 2011, this podcast builds from the ground up, week by week, creating a solid resource that grows with you. Tune in for a down-to-earth conversation that makes the airwaves feel a little more accessible and a lot more inviting.
Author: Language: English Episodes: 579

Foundations of Amateur Radio
Podcast Episodes
What's in an S-unit? [not-audio_url] [/not-audio_url]

Duration: 10:43
Foundations of Amateur Radio The other day fellow amateur Randall VK6WR raised an interesting question. Using his HP 8920A RF Communications Test Set, which you might recall from our adventures in measuring radio harmoni…
Where is the spark .. gap? [not-audio_url] [/not-audio_url]

Duration: 8:35
Foundations of Amateur Radio The thing I love most about this amazing hobby of amateur radio is the sheer size of the community and the depth of knowledge that comes with it. Case in point, the other day I mentioned the…
Bald Yak 18: Everything Everywhere All at Once? [not-audio_url] [/not-audio_url]

Duration: 7:02
Foundations of Amateur Radio The other day I was playing around with RDS, or Radio Data System, it's a digital signal that's often embedded in a commercial broadcast FM transmission. Among other things it contains inform…
Bald Yak 17: Adventures in Radio Data Systems [not-audio_url] [/not-audio_url]

Duration: 5:01
Foundations of Amateur Radio While spending some quality time discovering what I don't know about GNU Radio, I explored the notion of attempting to at least understand a little more about how an FM signal works. Dependin…
Bald Yak 16: How do you decode FM? [not-audio_url] [/not-audio_url]

Duration: 6:51
Foundations of Amateur Radio How do you make a hole? That's a pretty straightforward kind of question, and by the time this sentence is finished, there's going to be at least as many answers as people who considered it.…
One step forward ... three steps back. [not-audio_url] [/not-audio_url]

Duration: 5:38
Foundations of Amateur Radio Still excited from my minor victory in discovering a missing puzzle piece associated with the project I'm working on, I spent the past week introducing my head, if not literally, at least fig…
Bald Yak 15, Playing with Radio .. now with software [not-audio_url] [/not-audio_url]

Duration: 6:48
Foundations of Amateur Radio A little while ago I discussed a lovely article by programmer, artist, and game designer "blinry" called "Fifty Things you can do with a Software Defined Radio". This week it occurred to me t…
How to go about documenting your setup? [not-audio_url] [/not-audio_url]

Duration: 5:22
Foundations of Amateur Radio How to go about documenting your setup? Possibly the single most important thing that separates science from "fiddling around" is documentation. Figuring out how to document things is often n…
Transmitting into a dummy load .. for a year .. on purpose. [not-audio_url] [/not-audio_url]

Duration: 8:34
Foundations of Amateur Radio Just under a year ago I started an experiment. I set-up a beacon for WSPR, or Weak Signal Propagation Reporter, transmitting at 200 mW into a dummy load using eight bands between 80m and 10m.…
How to become a radio amateur today? [not-audio_url] [/not-audio_url]

Duration: 6:02
Foundations of Amateur Radio The other day a fellow amateur revealed that they qualified for membership of the QWCA, the Quarter Century Wireless Association .. twice over .. there may have been some innocent whistling i…