How does a waterfall display work?

How does a waterfall display work?

Author: Onno (VK6FLAB) May 19, 2018 Duration: 3:20
Foundations of Amateur Radio

With computers becoming more and more ensconced within the confines of our radio shack the variety of information available is increasing regularly. The introduction of a waterfall display has dramatically simplified the process of detecting what the activity level is on a particular band.

If you've never seen a waterfall display, it's often a real-time, or nearly real-time display of radio activity. Leaving aside the mechanics of how this comes about, or how much you see, generally it's presented as a picture that changes over time.

In reality it's a very compact way of showing a lot of information.

You can think of it as a chart, showing the horizontal axis as frequency, the vertical axis as time and the colour as signal strength. So as you look from left to right you'll look at higher and higher frequencies. For example, the left side might be 7 MHz and the right side might be 7.3 MHz. Halfway along is 7.150 MHz.

Similarly, now, as in zero seconds ago is at the top of the chart and 1 minute ago is lower. Depending on how fast you've set it to update the whole screen might represent 10 seconds, 10 minutes or 10 hours of information, entirely flexible, entirely configurable, entirely arbitrary.

If you think of the colour black as having no signal strength and the colour red being maximum signal strength, then the brighter the colours, the more signal there is.

A morse code signal might turn up as a series of dits and dahs running down the screen, with the oldest one being at the bottom and the newest one at the top.

An AM signal might show up as a thick line with a bright colour, that's a high signal strength in the middle and lighter colours or low signal strength towards the edges.

Every mode has its own visual characteristic and there are even modes that allow you to read information within a waterfall display.

One of the other things you'll see in a waterfall display is strange artefacts, things like a diagonal line for example.

If you think of what a diagonal line represents as a radio signal, it's something that has a strong signal at a particular time and frequency. A moment later it's changed frequency and a moment later it's done it again. The steepness of the line is dependent on two things, the speed that the frequency changes and the speed that the waterfall is updating.

Before waterfall displays, the way you'd experience such a signal would be something that flashes up as a low to high swoop, or a high to low swoop, depending on your listening mode and the direction of the frequency change.

So what is that signal?

Well, it's likely to be something called an Ionospheric Sounder. It does what you think it does. Ping the ionosphere across multiple frequencies. The station doing this is listening for a return echo to see if the ionosphere is reflective for that particular frequency at that particular moment. The information can be used to create a map of what the ionosphere is doing right now, which in turn is used to figure out what frequency to use to make a contact.

I should also mention that there is a signal identification wiki which shows and plays various identified and unidentified radio signals, hours of fun for the family.

I'm Onno VK6FLAB


For anyone curious about the crackle of a distant voice emerging from the static or the thrill of making a contact across the globe using nothing but radio waves, Foundations of Amateur Radio offers a friendly, steady guide. Hosted by Onno (VK6FLAB) from Australia, this long-running podcast acts as a companion for newcomers navigating the initial, often overwhelming, steps into this vast hobby. Each episode deliberately unpacks a single facet of amateur radio, breaking down technical concepts, equipment, and operating practices into digestible pieces. You'll hear practical advice on how to get started, find your place within the global community, and discover which of the hobby's countless avenues-from building antennas to satellite communication or emergency service-might spark your passion. It’s not about dry theory; it’s about demystifying the process and sharing the genuine rewards that keep enthusiasts engaged for a lifetime. Having evolved from its earlier incarnation in 2011, this podcast builds from the ground up, week by week, creating a solid resource that grows with you. Tune in for a down-to-earth conversation that makes the airwaves feel a little more accessible and a lot more inviting.
Author: Language: English Episodes: 579

Foundations of Amateur Radio
Podcast Episodes
Amateur Radio has literally changed my world view [not-audio_url] [/not-audio_url]

Duration: 4:14
Foundations of Amateur Radio The other day I went for a walk, I know, shock-horror, outside, daylight, nature, the whole thing, in a local national park, for the first time in too many years. Almost immediately I noticed…
How small is small? [not-audio_url] [/not-audio_url]

Duration: 8:08
Foundations of Amateur Radio I've owned a Yaesu FT-857d radio since becoming an amateur and at the time I was absolutely blown away by how much radio fits inside the box. It's smaller than most of the commercial radios I…
Bald Yak 12, getting raw data from a remote receiver [not-audio_url] [/not-audio_url]

Duration: 5:13
Foundations of Amateur Radio Over the past nine months or so I've been working on a project that I've called Bald Yak. If you're unfamiliar, the Bald Yak project aims to create a modular, bidirectional and distributed si…
Using an SDR as measuring equipment [not-audio_url] [/not-audio_url]

Duration: 5:14
Foundations of Amateur Radio The other day I stumbled on a random post by Gary N8DMT which caused me to view the world in a different way. The post outlined combining a PlutoSDR and an application called SATSAGEN to meas…
Listening to local RF via a web browser [not-audio_url] [/not-audio_url]

Duration: 4:42
Foundations of Amateur Radio Recently I discussed the idea of listening to the radio spectrum across the internet for the purposes of getting signal into your shack when radios, or in my case, antennas are causing you ch…
Decoding distant signals over the web? [not-audio_url] [/not-audio_url]

Duration: 5:49
Foundations of Amateur Radio One of the many challenges associated with being a radio amateur is actually being able to listen to weak signals. If you're like me and more than half the planet, you live in an urban area,…
What can we activate today? [not-audio_url] [/not-audio_url]

Duration: 4:28
Foundations of Amateur Radio Every single radio amateur has come to this hobby with an itch to scratch. Time and again I've seen amateurs around me pursue that particular purpose, only to come out the other end with a lo…
Using Amateur Bands for other purposes [not-audio_url] [/not-audio_url]

Duration: 10:59
Foundations of Amateur Radio Recently I came across a series of strident posts about the injustice associated with a non-amateur service using the 70cm band. Complete with links to discussions, spectrum plots, angst and…
There's promotion .. and then there's Amateur Radio [not-audio_url] [/not-audio_url]

Duration: 5:33
Foundations of Amateur Radio In the community of radio amateurs scattered around the planet we have a habit of getting together with others to have fun in whatever shape that takes. The obvious ones are HAMfests, car boo…
Decoding a signal ... [not-audio_url] [/not-audio_url]

Duration: 8:22
Foundations of Amateur Radio Recently I was given some radio data captured on the 40m band. Using a piece of software called "Universal Radio Hacker", I attempted to decode it. At the time I thought that this might be Mo…