How does a waterfall display work?

How does a waterfall display work?

Author: Onno (VK6FLAB) May 19, 2018 Duration: 3:20
Foundations of Amateur Radio

With computers becoming more and more ensconced within the confines of our radio shack the variety of information available is increasing regularly. The introduction of a waterfall display has dramatically simplified the process of detecting what the activity level is on a particular band.

If you've never seen a waterfall display, it's often a real-time, or nearly real-time display of radio activity. Leaving aside the mechanics of how this comes about, or how much you see, generally it's presented as a picture that changes over time.

In reality it's a very compact way of showing a lot of information.

You can think of it as a chart, showing the horizontal axis as frequency, the vertical axis as time and the colour as signal strength. So as you look from left to right you'll look at higher and higher frequencies. For example, the left side might be 7 MHz and the right side might be 7.3 MHz. Halfway along is 7.150 MHz.

Similarly, now, as in zero seconds ago is at the top of the chart and 1 minute ago is lower. Depending on how fast you've set it to update the whole screen might represent 10 seconds, 10 minutes or 10 hours of information, entirely flexible, entirely configurable, entirely arbitrary.

If you think of the colour black as having no signal strength and the colour red being maximum signal strength, then the brighter the colours, the more signal there is.

A morse code signal might turn up as a series of dits and dahs running down the screen, with the oldest one being at the bottom and the newest one at the top.

An AM signal might show up as a thick line with a bright colour, that's a high signal strength in the middle and lighter colours or low signal strength towards the edges.

Every mode has its own visual characteristic and there are even modes that allow you to read information within a waterfall display.

One of the other things you'll see in a waterfall display is strange artefacts, things like a diagonal line for example.

If you think of what a diagonal line represents as a radio signal, it's something that has a strong signal at a particular time and frequency. A moment later it's changed frequency and a moment later it's done it again. The steepness of the line is dependent on two things, the speed that the frequency changes and the speed that the waterfall is updating.

Before waterfall displays, the way you'd experience such a signal would be something that flashes up as a low to high swoop, or a high to low swoop, depending on your listening mode and the direction of the frequency change.

So what is that signal?

Well, it's likely to be something called an Ionospheric Sounder. It does what you think it does. Ping the ionosphere across multiple frequencies. The station doing this is listening for a return echo to see if the ionosphere is reflective for that particular frequency at that particular moment. The information can be used to create a map of what the ionosphere is doing right now, which in turn is used to figure out what frequency to use to make a contact.

I should also mention that there is a signal identification wiki which shows and plays various identified and unidentified radio signals, hours of fun for the family.

I'm Onno VK6FLAB


For anyone curious about the crackle of a distant voice emerging from the static or the thrill of making a contact across the globe using nothing but radio waves, Foundations of Amateur Radio offers a friendly, steady guide. Hosted by Onno (VK6FLAB) from Australia, this long-running podcast acts as a companion for newcomers navigating the initial, often overwhelming, steps into this vast hobby. Each episode deliberately unpacks a single facet of amateur radio, breaking down technical concepts, equipment, and operating practices into digestible pieces. You'll hear practical advice on how to get started, find your place within the global community, and discover which of the hobby's countless avenues-from building antennas to satellite communication or emergency service-might spark your passion. It’s not about dry theory; it’s about demystifying the process and sharing the genuine rewards that keep enthusiasts engaged for a lifetime. Having evolved from its earlier incarnation in 2011, this podcast builds from the ground up, week by week, creating a solid resource that grows with you. Tune in for a down-to-earth conversation that makes the airwaves feel a little more accessible and a lot more inviting.
Author: Language: English Episodes: 579

Foundations of Amateur Radio
Podcast Episodes
Bald Yak, droplet 9, fosphor and the impertinence of software [not-audio_url] [/not-audio_url]

Duration: 5:07
Foundations of Amateur Radio Have you ever come across a solution to a problem that you sort of knew you had, but didn't really appreciate until that moment? I had one of those recently. To set the scene, fair warning, w…
Bald Yak, arena 8, paying attention to the details [not-audio_url] [/not-audio_url]

Duration: 5:46
Foundations of Amateur Radio Recently I built a first attempt at a noise cancelling circuit, on my couch, in GNU Radio, without holding a soldering iron and running the risk of the room smelling like burnt chicken, becau…
Finding your path in this hobby [not-audio_url] [/not-audio_url]

Duration: 3:48
Foundations of Amateur Radio As you might recall, recently I stumbled on an excellent list of 52 weekly challenges put together by Fabian, DJ5CW and friends. You can find it at hamchallenge.org. As I've previously mentio…
Bald Yak, scene 7, building a circuit without burnt chicken smell [not-audio_url] [/not-audio_url]

Duration: 5:56
Foundations of Amateur Radio The other day I was sitting on the couch lounging about when I came up with an idea and there and then I picked up a circuit board, soldered down a hundred or so components and built a noise…
WSPR beacon QSY to 15m [not-audio_url] [/not-audio_url]

Duration: 5:02
Foundations of Amateur Radio For quite some time I have operated a WSPR or Weak Signal Propagation Reporter beacon on the 10m band. If you're not familiar with it, I've dialled the power right down to 10 dBm, or 10 milli…
Ham Challenge [not-audio_url] [/not-audio_url]

Duration: 3:37
Foundations of Amateur Radio The other day I noticed a flurry of QSL card designs come across my screen and it sparked me into action on actually creating such a card for myself. I've previously talked about what I think…
Bald Yak, scene 6, chaos will reign [not-audio_url] [/not-audio_url]

Duration: 6:13
Foundations of Amateur Radio Life is messy. This is not a revelation. We attempt to organise this chaos by using all kinds of magic incantations, to-do lists, new year resolutions, plans, projects and anything else you m…
Bald Yak, scene 5, debugging [not-audio_url] [/not-audio_url]

Duration: 5:02
Foundations of Amateur Radio As you might know, a little while ago I started a new project. "The Bald Yak project aims to create a modular, bidirectional and distributed signal processing and control system that leverage…
Bald Yak, week 4, time [not-audio_url] [/not-audio_url]

Duration: 5:13
Foundations of Amateur Radio In the analogue world you throw up an antenna, turn on your radio, tune to a station and sound comes out. Aside from propagation restrictions, you don't particularly care when you do this. In…
Bald Yak - week 3 - Push To Talk [not-audio_url] [/not-audio_url]

Duration: 5:39
Foundations of Amateur Radio When you key your transceiver, as-in, you trigger the Push To Talk or PTT button, you close a switch that activates the transmitter and in turn allows your voice to make it through the microp…