How does a waterfall display work?

How does a waterfall display work?

Author: Onno (VK6FLAB) May 19, 2018 Duration: 3:20
Foundations of Amateur Radio

With computers becoming more and more ensconced within the confines of our radio shack the variety of information available is increasing regularly. The introduction of a waterfall display has dramatically simplified the process of detecting what the activity level is on a particular band.

If you've never seen a waterfall display, it's often a real-time, or nearly real-time display of radio activity. Leaving aside the mechanics of how this comes about, or how much you see, generally it's presented as a picture that changes over time.

In reality it's a very compact way of showing a lot of information.

You can think of it as a chart, showing the horizontal axis as frequency, the vertical axis as time and the colour as signal strength. So as you look from left to right you'll look at higher and higher frequencies. For example, the left side might be 7 MHz and the right side might be 7.3 MHz. Halfway along is 7.150 MHz.

Similarly, now, as in zero seconds ago is at the top of the chart and 1 minute ago is lower. Depending on how fast you've set it to update the whole screen might represent 10 seconds, 10 minutes or 10 hours of information, entirely flexible, entirely configurable, entirely arbitrary.

If you think of the colour black as having no signal strength and the colour red being maximum signal strength, then the brighter the colours, the more signal there is.

A morse code signal might turn up as a series of dits and dahs running down the screen, with the oldest one being at the bottom and the newest one at the top.

An AM signal might show up as a thick line with a bright colour, that's a high signal strength in the middle and lighter colours or low signal strength towards the edges.

Every mode has its own visual characteristic and there are even modes that allow you to read information within a waterfall display.

One of the other things you'll see in a waterfall display is strange artefacts, things like a diagonal line for example.

If you think of what a diagonal line represents as a radio signal, it's something that has a strong signal at a particular time and frequency. A moment later it's changed frequency and a moment later it's done it again. The steepness of the line is dependent on two things, the speed that the frequency changes and the speed that the waterfall is updating.

Before waterfall displays, the way you'd experience such a signal would be something that flashes up as a low to high swoop, or a high to low swoop, depending on your listening mode and the direction of the frequency change.

So what is that signal?

Well, it's likely to be something called an Ionospheric Sounder. It does what you think it does. Ping the ionosphere across multiple frequencies. The station doing this is listening for a return echo to see if the ionosphere is reflective for that particular frequency at that particular moment. The information can be used to create a map of what the ionosphere is doing right now, which in turn is used to figure out what frequency to use to make a contact.

I should also mention that there is a signal identification wiki which shows and plays various identified and unidentified radio signals, hours of fun for the family.

I'm Onno VK6FLAB


For anyone curious about the crackle of a distant voice emerging from the static or the thrill of making a contact across the globe using nothing but radio waves, Foundations of Amateur Radio offers a friendly, steady guide. Hosted by Onno (VK6FLAB) from Australia, this long-running podcast acts as a companion for newcomers navigating the initial, often overwhelming, steps into this vast hobby. Each episode deliberately unpacks a single facet of amateur radio, breaking down technical concepts, equipment, and operating practices into digestible pieces. You'll hear practical advice on how to get started, find your place within the global community, and discover which of the hobby's countless avenues-from building antennas to satellite communication or emergency service-might spark your passion. It’s not about dry theory; it’s about demystifying the process and sharing the genuine rewards that keep enthusiasts engaged for a lifetime. Having evolved from its earlier incarnation in 2011, this podcast builds from the ground up, week by week, creating a solid resource that grows with you. Tune in for a down-to-earth conversation that makes the airwaves feel a little more accessible and a lot more inviting.
Author: Language: English Episodes: 579

Foundations of Amateur Radio
Podcast Episodes
Being an amateur without either radio or antenna [not-audio_url] [/not-audio_url]

Duration: 3:50
Foundations of Amateur Radio A recent comment by a fellow amateur sparked a train of thought that made me wonder why there is a pervasive idea within our community that you need a radio transmitter and antenna to be a ra…
Becoming Mode Agile [not-audio_url] [/not-audio_url]

Duration: 3:21
Foundations of Amateur Radio Over the years I've talked about different ways of using our license to transmit. I've discussed things like modes such as voice AM, FM, and SSB, and digital modes like FT8, WSPR, RTTY, FreeD…
Playing Games On-Air [not-audio_url] [/not-audio_url]

Duration: 4:37
Foundations of Amateur Radio One of the basic aspects of being human and growing up is the process of learning. From a young age we explore our environment, play with others, have fun, fall over and bruise our knees, get…
What is Amateur Radio really about? [not-audio_url] [/not-audio_url]

Duration: 4:41
Foundations of Amateur Radio When you join the community of radio amateurs, or when you briefly look over the shoulder of the nearest devotee, you're likely to discover that this is a hobby about a great many different i…
What is the difference between a Dummy Load and an Antenna? [not-audio_url] [/not-audio_url]

Duration: 5:57
Foundations of Amateur Radio Recently I started an experiment I plan to run for a year. Using a WSPR beacon and a dummy load I'm transmitting 200 mW, 24 hours a day across all bands supported by my hardware, in this case…
Echos from the past, 150 ms ago [not-audio_url] [/not-audio_url]

Duration: 6:36
Foundations of Amateur Radio Recently Glynn VK6PAW and I had the opportunity to play radio. This isn't something that happens often so we try to make the most of it. For our efforts we had plenty of frustrations, to the…
Bald Yak 11, the goo between hardware and software [not-audio_url] [/not-audio_url]

Duration: 5:57
Foundations of Amateur Radio Recently I received a question in relation to the Bald Yak project. If you're not familiar, "The Bald Yak project aims to create a modular, bidirectional and distributed signal processing and…
DX on a dummy load? [not-audio_url] [/not-audio_url]

Duration: 7:00
Foundations of Amateur Radio Recently I made a joke about operating your station with a dummy load in response to John VA3KOT operating their station with the craziest antenna they ever used. It got me thinking about the…
What's the story you'd like to tell yourself? [not-audio_url] [/not-audio_url]

Duration: 4:20
Foundations of Amateur Radio When you joined the global community of radio amateurs you did so with a perspective that represented, at the time, what you thought the hobby was and how it operated. Since then, years, mont…
Bald Yak, universe 10, how does all fit together? [not-audio_url] [/not-audio_url]

Duration: 7:09
Foundations of Amateur Radio Recently I received a lovely email from Michele IU4TBF asking some pertinent questions about the Bald Yak project. If you're unfamiliar, the Bald Yak project aims to create a modular, bidirec…