Using Lasers To Talk To Satellites

Using Lasers To Talk To Satellites

Author: MapScaping June 14, 2023 Duration: 44:51
How do we get data from a satellite down to Earth? How do we task a satellite?  Today the answer is likely to be via radios and a system of downlink sites or ground stations. As the satellites pass overhead or within “line of sight” data can be sent via radio from the satellite to the receiver on the ground.  If you don’t want to wait until the satellite can see the ground station, you can send your data to a geostationary satellite that can always see a ground station and let it send the data back to Earth.  Radios are tried and tested, they have been used for this purpose since the inception of satellite communication and radio waves can pass through Earth's atmosphere without significant loss! But … the frequency spectrum for radio waves is strictly regulated, which can limit available channels for communication, and the bandwidth of radio frequencies is limited, which can reduce the volume of data transmission. What about lasers?  You can send more data faster with a laser, you don’t need to worry about interfering with someone else part of the radio spectrum, and ground stations can be much smaller even human-portable!  But … lasers struggle with clouds and the technology is still relatively new So what is the best way to communicate with satellites? Radio or Laser? The answer is … it depends ;)    Jordan Wachs, Director of Business Development for SpaceRake.net does a great job adding context to this discussion but perhaps the bigger question here is what will we do when satellites become internet devices, part of the Internet of Things? What if they were always on always connected in the same way your phone is always on, always connected? What will this enable?    This episode was sponsored by Sponsored by Sinergise, as part of Copernicus Data Space Ecosystem knowledge sharing   People who liked this episode also liked …   How to keep your satellite pointing at earth https://mapscaping.com/podcast/how-to-keep-your-satellite-pointing-at-earth/   Hyperspectral v’s Multispectral https://mapscaping.com/podcast/hyperspectral-vs-multispectral/   Sentinel Hub https://mapscaping.com/podcast/sentinel-hub/   Swing by our website sometime https://mapscaping.com/   Some more episodes you might enjoy   ESRI, GIS careers, Geospatial Data Science  QGIS, Geospatial Python, ArcGIS Pro Google Maps, Geomatics, Cartography Location Intelligence, Mapping

The MapScaping Podcast delves into the intricate world where geography meets data. This isn't about static paper maps, but the dynamic, digital systems that help us understand our planet. Each conversation focuses on the practical and the visionary within GIS, geospatial technology, remote sensing, and earth observation. You'll hear directly from the cartographers, data scientists, software developers, and analysts who are building the tools and interpreting the information that defines modern digital geography. The discussions explore how satellite imagery is used, how location intelligence solves complex problems, and where the technology is headed next. For professionals, students, or anyone fascinated by how we chart and comprehend our world, this podcast offers a grounded look at a field that is constantly redrawing its own boundaries. Tune in to The MapScaping Podcast for insights that are as much about the people and ideas shaping this space as they are about the technology itself. It's a consistent source for those who think spatially, providing depth and context that goes beyond the software interface. Listen to find out how the hidden structures of geospatial data influence everything from urban planning and environmental conservation to business logistics and everyday apps.
Author: Language: English Episodes: 100

The MapScaping Podcast - GIS, Geospatial, Remote Sensing, earth observation and digital geography
Podcast Episodes
Satclip - Encoding Location [not-audio_url] [/not-audio_url]

Duration: 43:40
In this episode, I'm joined by Konstantine Klemmer, a researcher at Microsoft, to dive deep into the fascinating world of GeoAI. Konstantine introduces us to Satclip, a cutting-edge model that encodes geographic location…
Natural Language Geocoding [not-audio_url] [/not-audio_url]

Duration: 45:14
In this episode, I welcome Jason Gilman, a Principal Software Engineer at Element 84, to explore the exciting world of natural language geocoding. Key Topics Discussed: Introduction to Natural Language Geocoding: Jason e…
Semantic Search For Geospatial [not-audio_url] [/not-audio_url]

Duration: 50:39
This podcast episode is all about semantic search and using embeddings to analyse text and social media data. Dominik Weckmüller, a researcher at the Technical University of Dresden, talks about his PhD research, where h…
Why You Should Care About L Band [not-audio_url] [/not-audio_url]

Duration: 51:14
In this episode, we welcome back Lauren Guy, CEO and founder of ASTERRA, a groundbreaking company using L band and synthetic aperture radar (SAR) for commercial purposes. Lauren shares his journey as a geophysicist and d…
GeoParquet For Beginners [not-audio_url] [/not-audio_url]

Duration: 42:00
Cloud-native geospatial, range requests, chucks, COGs and COPCs ... [ insert confusing acronym here ] Sometimes It feels like we need to learn a whole new vocabulary and if you have been doing #geo for a while you might…
Finding Stuff Indoors [not-audio_url] [/not-audio_url]

Duration: 49:37
Mappedin started as a school project and evolved into a leading indoor mapping company, working with malls, airports, hospitals, and Fortune 500 companies. You guessed, today's podcast is all about indoor mapping, why it…
What is humanitarian GIS? [not-audio_url] [/not-audio_url]

Duration: 47:24
Hugo Powell, from immap.org shares his expert insights on how GIS technologies are leveraged to analyze data, visualize scenarios, and facilitate rapid decision-making during emergencies. Here are the key tools mentioned…
AI Autocomplete for QGIS [not-audio_url] [/not-audio_url]

Duration: 42:52
AI Autocomplete for QGIS Brendan Ashworth the CTO and co-founder of https://buntinglabs.com/ focuses on integrating AI with QGIS, and today on the podcast we are talking about Autocomplete for vectorization. Along the wa…
The way you talk about your geospatial skills is costing you money [not-audio_url] [/not-audio_url]

Duration: 52:17
Refactoring the Way you Talk About your geospatial skills: It is Costing you Money Some of the key topics in this episode 1.Our Geospatial Skills and Marketability: There's a realization that while our traditional geospa…