How does a waterfall display work?

How does a waterfall display work?

Author: Onno (VK6FLAB) May 19, 2018 Duration: 3:20
Foundations of Amateur Radio

With computers becoming more and more ensconced within the confines of our radio shack the variety of information available is increasing regularly. The introduction of a waterfall display has dramatically simplified the process of detecting what the activity level is on a particular band.

If you've never seen a waterfall display, it's often a real-time, or nearly real-time display of radio activity. Leaving aside the mechanics of how this comes about, or how much you see, generally it's presented as a picture that changes over time.

In reality it's a very compact way of showing a lot of information.

You can think of it as a chart, showing the horizontal axis as frequency, the vertical axis as time and the colour as signal strength. So as you look from left to right you'll look at higher and higher frequencies. For example, the left side might be 7 MHz and the right side might be 7.3 MHz. Halfway along is 7.150 MHz.

Similarly, now, as in zero seconds ago is at the top of the chart and 1 minute ago is lower. Depending on how fast you've set it to update the whole screen might represent 10 seconds, 10 minutes or 10 hours of information, entirely flexible, entirely configurable, entirely arbitrary.

If you think of the colour black as having no signal strength and the colour red being maximum signal strength, then the brighter the colours, the more signal there is.

A morse code signal might turn up as a series of dits and dahs running down the screen, with the oldest one being at the bottom and the newest one at the top.

An AM signal might show up as a thick line with a bright colour, that's a high signal strength in the middle and lighter colours or low signal strength towards the edges.

Every mode has its own visual characteristic and there are even modes that allow you to read information within a waterfall display.

One of the other things you'll see in a waterfall display is strange artefacts, things like a diagonal line for example.

If you think of what a diagonal line represents as a radio signal, it's something that has a strong signal at a particular time and frequency. A moment later it's changed frequency and a moment later it's done it again. The steepness of the line is dependent on two things, the speed that the frequency changes and the speed that the waterfall is updating.

Before waterfall displays, the way you'd experience such a signal would be something that flashes up as a low to high swoop, or a high to low swoop, depending on your listening mode and the direction of the frequency change.

So what is that signal?

Well, it's likely to be something called an Ionospheric Sounder. It does what you think it does. Ping the ionosphere across multiple frequencies. The station doing this is listening for a return echo to see if the ionosphere is reflective for that particular frequency at that particular moment. The information can be used to create a map of what the ionosphere is doing right now, which in turn is used to figure out what frequency to use to make a contact.

I should also mention that there is a signal identification wiki which shows and plays various identified and unidentified radio signals, hours of fun for the family.

I'm Onno VK6FLAB


For anyone curious about the crackle of a distant voice emerging from the static or the thrill of making a contact across the globe using nothing but radio waves, Foundations of Amateur Radio offers a friendly, steady guide. Hosted by Onno (VK6FLAB) from Australia, this long-running podcast acts as a companion for newcomers navigating the initial, often overwhelming, steps into this vast hobby. Each episode deliberately unpacks a single facet of amateur radio, breaking down technical concepts, equipment, and operating practices into digestible pieces. You'll hear practical advice on how to get started, find your place within the global community, and discover which of the hobby's countless avenues-from building antennas to satellite communication or emergency service-might spark your passion. It’s not about dry theory; it’s about demystifying the process and sharing the genuine rewards that keep enthusiasts engaged for a lifetime. Having evolved from its earlier incarnation in 2011, this podcast builds from the ground up, week by week, creating a solid resource that grows with you. Tune in for a down-to-earth conversation that makes the airwaves feel a little more accessible and a lot more inviting.
Author: Language: English Episodes: 579

Foundations of Amateur Radio
Podcast Episodes
In the beginning there was chaos... [not-audio_url] [/not-audio_url]

Duration: 3:13
Foundations of Amateur Radio Over the weekend I learnt to my chagrin that my shack was not ready for the contest I decided to participate in for an hour. Truth be told, it was probably me who wasn't ready, but I'm going…
Planning for an emergency... [not-audio_url] [/not-audio_url]

Duration: 3:31
Foundations of Amateur Radio Identifying the problem is the first step in fixing it and with that I want to talk about emergencies. One of the very first things I was told about our amateur radio community was that we're…
Why do we communicate? [not-audio_url] [/not-audio_url]

Duration: 4:11
Foundations of Amateur Radio The art of amateur radio is many things to many people. For me it's a technological challenge, a learning, a way to broaden my experience, a way to be technically active away from my consulta…
Introduction to the terms of contesting [not-audio_url] [/not-audio_url]

Duration: 6:31
Foundations of Amateur Radio One of my favourite activities is contesting. Essentially it's a time-limited activation of your station for the purposes of testing your skill and station against other participants. Contest…
It beeps! [not-audio_url] [/not-audio_url]

Duration: 4:39
Foundations of Amateur Radio After weeks of attempting to get some noise, any noise out of my PlutoSDR I have finally cracked it. Not sure if cracked it refers to my sanity or the outcome, but beeping was heard from the…
What happens when you plug it in? [not-audio_url] [/not-audio_url]

Duration: 4:11
Foundations of Amateur Radio The other day I took delivery of a shiny new circuit board populated with components and connectors. Knowing me, you'd assume that I'd been the recipient of some kind of software defined radi…
How to compare radios [not-audio_url] [/not-audio_url]

Duration: 4:59
Foundations of Amateur Radio One of the topics I've been talking about lately is the idea that we might be able to measure the performance of your radio in some meaningful way using equipment that can be either obtained…
Pictures can say more than words [not-audio_url] [/not-audio_url]

Duration: 4:32
Foundations of Amateur Radio Recently I've spoken about measuring the frequency response of your radio and what the benefits of doing so might be. Today I've got some progress to report and some initial discoveries. Agai…
Testing your radio's audio frequency response [not-audio_url] [/not-audio_url]

Duration: 4:31
Foundations of Amateur Radio During the week I was reading a comment from another amateur about digital modes. Tucked inside that comment was a phrase that could easily have been overlooked, but it reminded me that there…
What's in a Dream? [not-audio_url] [/not-audio_url]

Duration: 7:40
Foundations of Amateur Radio On the 6th of June, 2004, two Brazilian amateurs Roland, PY4ZBZ and Arnaldo, PY4BL made a historic contact on 40m. The distance was not particularly significant, only 70 km, but the mode was.…