How does a waterfall display work?

How does a waterfall display work?

Author: Onno (VK6FLAB) May 19, 2018 Duration: 3:20
Foundations of Amateur Radio

With computers becoming more and more ensconced within the confines of our radio shack the variety of information available is increasing regularly. The introduction of a waterfall display has dramatically simplified the process of detecting what the activity level is on a particular band.

If you've never seen a waterfall display, it's often a real-time, or nearly real-time display of radio activity. Leaving aside the mechanics of how this comes about, or how much you see, generally it's presented as a picture that changes over time.

In reality it's a very compact way of showing a lot of information.

You can think of it as a chart, showing the horizontal axis as frequency, the vertical axis as time and the colour as signal strength. So as you look from left to right you'll look at higher and higher frequencies. For example, the left side might be 7 MHz and the right side might be 7.3 MHz. Halfway along is 7.150 MHz.

Similarly, now, as in zero seconds ago is at the top of the chart and 1 minute ago is lower. Depending on how fast you've set it to update the whole screen might represent 10 seconds, 10 minutes or 10 hours of information, entirely flexible, entirely configurable, entirely arbitrary.

If you think of the colour black as having no signal strength and the colour red being maximum signal strength, then the brighter the colours, the more signal there is.

A morse code signal might turn up as a series of dits and dahs running down the screen, with the oldest one being at the bottom and the newest one at the top.

An AM signal might show up as a thick line with a bright colour, that's a high signal strength in the middle and lighter colours or low signal strength towards the edges.

Every mode has its own visual characteristic and there are even modes that allow you to read information within a waterfall display.

One of the other things you'll see in a waterfall display is strange artefacts, things like a diagonal line for example.

If you think of what a diagonal line represents as a radio signal, it's something that has a strong signal at a particular time and frequency. A moment later it's changed frequency and a moment later it's done it again. The steepness of the line is dependent on two things, the speed that the frequency changes and the speed that the waterfall is updating.

Before waterfall displays, the way you'd experience such a signal would be something that flashes up as a low to high swoop, or a high to low swoop, depending on your listening mode and the direction of the frequency change.

So what is that signal?

Well, it's likely to be something called an Ionospheric Sounder. It does what you think it does. Ping the ionosphere across multiple frequencies. The station doing this is listening for a return echo to see if the ionosphere is reflective for that particular frequency at that particular moment. The information can be used to create a map of what the ionosphere is doing right now, which in turn is used to figure out what frequency to use to make a contact.

I should also mention that there is a signal identification wiki which shows and plays various identified and unidentified radio signals, hours of fun for the family.

I'm Onno VK6FLAB


For anyone curious about the crackle of a distant voice emerging from the static or the thrill of making a contact across the globe using nothing but radio waves, Foundations of Amateur Radio offers a friendly, steady guide. Hosted by Onno (VK6FLAB) from Australia, this long-running podcast acts as a companion for newcomers navigating the initial, often overwhelming, steps into this vast hobby. Each episode deliberately unpacks a single facet of amateur radio, breaking down technical concepts, equipment, and operating practices into digestible pieces. You'll hear practical advice on how to get started, find your place within the global community, and discover which of the hobby's countless avenues-from building antennas to satellite communication or emergency service-might spark your passion. It’s not about dry theory; it’s about demystifying the process and sharing the genuine rewards that keep enthusiasts engaged for a lifetime. Having evolved from its earlier incarnation in 2011, this podcast builds from the ground up, week by week, creating a solid resource that grows with you. Tune in for a down-to-earth conversation that makes the airwaves feel a little more accessible and a lot more inviting.
Author: Language: English Episodes: 579

Foundations of Amateur Radio
Podcast Episodes
When you share the hobby grows ... [not-audio_url] [/not-audio_url]

Duration: 4:58
Foundations of Amateur Radio Recently I received a lovely email from Simon G0EIY, who reminded me that there is a voice-keyer that fits into a microphone. It was designed by Olli DH8BQA as a replacement for a standard Ya…
Here be Dragons, venturing into uncharted territory ... [not-audio_url] [/not-audio_url]

Duration: 4:55
Foundations of Amateur Radio Sometimes when you head into uncharted territory, you gotta laugh at yourself from time to time. Last weekend I participated in a contest, something I enjoy doing as you might recall. To simp…
Removing technology for a change [not-audio_url] [/not-audio_url]

Duration: 4:31
Foundations of Amateur Radio My first ever interaction with amateur radio was a field day on Boterhuiseiland near Leiden in the Netherlands when I was about twelve. The station was set-up in an army tent and the setting…
What radio should I buy as my first one? [not-audio_url] [/not-audio_url]

Duration: 4:53
Foundations of Amateur Radio Recently a budding new amateur asked the question: "What radio should I buy?" It's a common question, one I asked a decade ago. Over the years I've made several attempts at answering this inn…
Bringing chaos into order [not-audio_url] [/not-audio_url]

Duration: 5:09
Foundations of Amateur Radio One of the questions you're faced with when you start your amateur journey is around connectors. You quickly discover that every piece of equipment with an RF socket has a different one fit f…
Streaming a dozen repeaters with an RTL-SDR dongle [not-audio_url] [/not-audio_url]

Duration: 4:33
Foundations of Amateur Radio A while ago as part of my ongoing exploration into all things radio I came across a utility called rtlsdr-airband. It's a tool that uses a cheap software defined radio dongle to listen to a s…
Soldering Irons and Software [not-audio_url] [/not-audio_url]

Duration: 4:17
Foundations of Amateur Radio The activity of amateur radio revolves around experimentation. For over a century the amateur community has designed, sourced, scrounged and built experiments. Big or small, working or not, e…
Getting started on WSPR with a PlutoSDR [not-audio_url] [/not-audio_url]

Duration: 5:02
Foundations of Amateur Radio As you might recall, I took delivery of a device called a PlutoSDR some time ago. If you're not familiar, it's a single-board computer that has the ability to transmit and receive between 70…
Ergonomics in your shack [not-audio_url] [/not-audio_url]

Duration: 5:54
Foundations of Amateur Radio In my day job I work in computing. For many years that consisted of going on-site and fixing stuff. Invariably this involved me fixing servers that were installed into a room the size of a br…
How much bandwidth is there? [not-audio_url] [/not-audio_url]

Duration: 5:14
Foundations of Amateur Radio Have you ever taken a moment to consider the available bandwidth on the various amateur bands? As an entrant into amateur radio in Australia as a Foundation licence holder you have access to…