How does a waterfall display work?

How does a waterfall display work?

Author: Onno (VK6FLAB) May 19, 2018 Duration: 3:20
Foundations of Amateur Radio

With computers becoming more and more ensconced within the confines of our radio shack the variety of information available is increasing regularly. The introduction of a waterfall display has dramatically simplified the process of detecting what the activity level is on a particular band.

If you've never seen a waterfall display, it's often a real-time, or nearly real-time display of radio activity. Leaving aside the mechanics of how this comes about, or how much you see, generally it's presented as a picture that changes over time.

In reality it's a very compact way of showing a lot of information.

You can think of it as a chart, showing the horizontal axis as frequency, the vertical axis as time and the colour as signal strength. So as you look from left to right you'll look at higher and higher frequencies. For example, the left side might be 7 MHz and the right side might be 7.3 MHz. Halfway along is 7.150 MHz.

Similarly, now, as in zero seconds ago is at the top of the chart and 1 minute ago is lower. Depending on how fast you've set it to update the whole screen might represent 10 seconds, 10 minutes or 10 hours of information, entirely flexible, entirely configurable, entirely arbitrary.

If you think of the colour black as having no signal strength and the colour red being maximum signal strength, then the brighter the colours, the more signal there is.

A morse code signal might turn up as a series of dits and dahs running down the screen, with the oldest one being at the bottom and the newest one at the top.

An AM signal might show up as a thick line with a bright colour, that's a high signal strength in the middle and lighter colours or low signal strength towards the edges.

Every mode has its own visual characteristic and there are even modes that allow you to read information within a waterfall display.

One of the other things you'll see in a waterfall display is strange artefacts, things like a diagonal line for example.

If you think of what a diagonal line represents as a radio signal, it's something that has a strong signal at a particular time and frequency. A moment later it's changed frequency and a moment later it's done it again. The steepness of the line is dependent on two things, the speed that the frequency changes and the speed that the waterfall is updating.

Before waterfall displays, the way you'd experience such a signal would be something that flashes up as a low to high swoop, or a high to low swoop, depending on your listening mode and the direction of the frequency change.

So what is that signal?

Well, it's likely to be something called an Ionospheric Sounder. It does what you think it does. Ping the ionosphere across multiple frequencies. The station doing this is listening for a return echo to see if the ionosphere is reflective for that particular frequency at that particular moment. The information can be used to create a map of what the ionosphere is doing right now, which in turn is used to figure out what frequency to use to make a contact.

I should also mention that there is a signal identification wiki which shows and plays various identified and unidentified radio signals, hours of fun for the family.

I'm Onno VK6FLAB


For anyone curious about the crackle of a distant voice emerging from the static or the thrill of making a contact across the globe using nothing but radio waves, Foundations of Amateur Radio offers a friendly, steady guide. Hosted by Onno (VK6FLAB) from Australia, this long-running podcast acts as a companion for newcomers navigating the initial, often overwhelming, steps into this vast hobby. Each episode deliberately unpacks a single facet of amateur radio, breaking down technical concepts, equipment, and operating practices into digestible pieces. You'll hear practical advice on how to get started, find your place within the global community, and discover which of the hobby's countless avenues-from building antennas to satellite communication or emergency service-might spark your passion. It’s not about dry theory; it’s about demystifying the process and sharing the genuine rewards that keep enthusiasts engaged for a lifetime. Having evolved from its earlier incarnation in 2011, this podcast builds from the ground up, week by week, creating a solid resource that grows with you. Tune in for a down-to-earth conversation that makes the airwaves feel a little more accessible and a lot more inviting.
Author: Language: English Episodes: 579

Foundations of Amateur Radio
Podcast Episodes
How far can I talk on radio? [not-audio_url] [/not-audio_url]

Duration: 4:33
Foundations of Amateur Radio How far can I talk on radio? A question that regularly hits the enquiring minds of people who are not (yet) radio amateurs is one about distance. For both amateurs and those who are not ye) i…
What's allowed on our bands? [not-audio_url] [/not-audio_url]

Duration: 5:20
Foundations of Amateur Radio Recently there was a discussion on social media about the legality of various types of transmissions. Before I get into the specifics, it's worth looking at some of the rules around this. I w…
Your Software Defined Radio around the home [not-audio_url] [/not-audio_url]

Duration: 4:57
Foundations of Amateur Radio What would you do if you found that at random times your garage door opener didn't work, or the Wi-Fi network dropped out, or you couldn't switch off a light with an RF controller? That's the…
The Software Defined Radio vs. Traditional Radio choice [not-audio_url] [/not-audio_url]

Duration: 3:47
Foundations of Amateur Radio For some time I've been explaining how some of the internal workings of a Software Defined Radio operate with a view to getting into the nitty gritty of the why and the how. This exploration…
The Regulator [not-audio_url] [/not-audio_url]

Duration: 4:32
Foundations of Amateur Radio From time to time our hobby changes. While the idea that we're all a bunch of old men playing with spark gap transmitters, or using strange noises to the annoyance of others, the reality of a…
From Milk to Direct Conversion in a Software Defined Radio [not-audio_url] [/not-audio_url]

Duration: 4:48
Foundations of Amateur Radio It seems my analogy with milk glasses hit a nerve when I explained some of the inner workings of a simple Analogue to Digital Converter, also known as an A/D Converter or ADC as part of my ex…
Milking Software Defined Radio [not-audio_url] [/not-audio_url]

Duration: 3:16
Foundations of Amateur Radio One of the unsung hero components of a Software Defined Radio is the A/D or Analogue to Digital converter. Its job is to convert the analogue signal that's coming in via the antenna into a di…
When digging gives you more understanding, the magic of software. [not-audio_url] [/not-audio_url]

Duration: 5:20
Foundations of Amateur Radio Today I'm going to go sideways to move forward. In amateur radio we consider circuits, components such as transistors, inductors, capacitors, crystals and how they're connected to each other.…
Software Defined Radio offers another path to the same information. [not-audio_url] [/not-audio_url]

Duration: 5:05
Foundations of Amateur Radio Over the past few weeks I've been describing how some of the fundamental concepts of software defined radio work and how some of these operate and interact with each other. You might think of…
Digital Origami in Software Defined Radio [not-audio_url] [/not-audio_url]

Duration: 4:31
Foundations of Amateur Radio As a quick recap of what I've discussed before, a Software Defined Radio is a tool that essentially measures the voltage at the base of an antenna system and sends that to a computer for proc…