How does a waterfall display work?

How does a waterfall display work?

Author: Onno (VK6FLAB) May 19, 2018 Duration: 3:20
Foundations of Amateur Radio

With computers becoming more and more ensconced within the confines of our radio shack the variety of information available is increasing regularly. The introduction of a waterfall display has dramatically simplified the process of detecting what the activity level is on a particular band.

If you've never seen a waterfall display, it's often a real-time, or nearly real-time display of radio activity. Leaving aside the mechanics of how this comes about, or how much you see, generally it's presented as a picture that changes over time.

In reality it's a very compact way of showing a lot of information.

You can think of it as a chart, showing the horizontal axis as frequency, the vertical axis as time and the colour as signal strength. So as you look from left to right you'll look at higher and higher frequencies. For example, the left side might be 7 MHz and the right side might be 7.3 MHz. Halfway along is 7.150 MHz.

Similarly, now, as in zero seconds ago is at the top of the chart and 1 minute ago is lower. Depending on how fast you've set it to update the whole screen might represent 10 seconds, 10 minutes or 10 hours of information, entirely flexible, entirely configurable, entirely arbitrary.

If you think of the colour black as having no signal strength and the colour red being maximum signal strength, then the brighter the colours, the more signal there is.

A morse code signal might turn up as a series of dits and dahs running down the screen, with the oldest one being at the bottom and the newest one at the top.

An AM signal might show up as a thick line with a bright colour, that's a high signal strength in the middle and lighter colours or low signal strength towards the edges.

Every mode has its own visual characteristic and there are even modes that allow you to read information within a waterfall display.

One of the other things you'll see in a waterfall display is strange artefacts, things like a diagonal line for example.

If you think of what a diagonal line represents as a radio signal, it's something that has a strong signal at a particular time and frequency. A moment later it's changed frequency and a moment later it's done it again. The steepness of the line is dependent on two things, the speed that the frequency changes and the speed that the waterfall is updating.

Before waterfall displays, the way you'd experience such a signal would be something that flashes up as a low to high swoop, or a high to low swoop, depending on your listening mode and the direction of the frequency change.

So what is that signal?

Well, it's likely to be something called an Ionospheric Sounder. It does what you think it does. Ping the ionosphere across multiple frequencies. The station doing this is listening for a return echo to see if the ionosphere is reflective for that particular frequency at that particular moment. The information can be used to create a map of what the ionosphere is doing right now, which in turn is used to figure out what frequency to use to make a contact.

I should also mention that there is a signal identification wiki which shows and plays various identified and unidentified radio signals, hours of fun for the family.

I'm Onno VK6FLAB


For anyone curious about the crackle of a distant voice emerging from the static or the thrill of making a contact across the globe using nothing but radio waves, Foundations of Amateur Radio offers a friendly, steady guide. Hosted by Onno (VK6FLAB) from Australia, this long-running podcast acts as a companion for newcomers navigating the initial, often overwhelming, steps into this vast hobby. Each episode deliberately unpacks a single facet of amateur radio, breaking down technical concepts, equipment, and operating practices into digestible pieces. You'll hear practical advice on how to get started, find your place within the global community, and discover which of the hobby's countless avenues-from building antennas to satellite communication or emergency service-might spark your passion. It’s not about dry theory; it’s about demystifying the process and sharing the genuine rewards that keep enthusiasts engaged for a lifetime. Having evolved from its earlier incarnation in 2011, this podcast builds from the ground up, week by week, creating a solid resource that grows with you. Tune in for a down-to-earth conversation that makes the airwaves feel a little more accessible and a lot more inviting.
Author: Language: English Episodes: 579

Foundations of Amateur Radio
Podcast Episodes
Creativity comes with practice [not-audio_url] [/not-audio_url]

Duration: 4:09
Foundations of Amateur Radio I grew up with Lego, plastic blocks that you can put together in infinite variety. My oldest Lego kit hails from 1964, kit 324: House with Garage and it's still in pretty good nick today. It'…
All the power in the world and not enough battery! [not-audio_url] [/not-audio_url]

Duration: 4:56
Foundations of Amateur Radio The transceiver you use to get on air and make noise needs power to operate. The traditional voltage for our amateur equipment is 13.8 Volts. Why not 12 Volts you ask. The short answer is che…
More WSPR adventures [not-audio_url] [/not-audio_url]

Duration: 4:46
Foundations of Amateur Radio Previously I've spoken about the joy of making something out of not much. On that theme I've covered WSPR, the Weak Signal Propagation Reporter, a mechanism to use a modest station to report…
Modern Tools for a Modern Hobby [not-audio_url] [/not-audio_url]

Duration: 3:59
Foundations of Amateur Radio The hobby we call amateur radio is enormous. One amateur called it a thousand hobbies in one and that just about sums it up for me. Being bored inside this hobby is not an option, because the…
How effective is your station? [not-audio_url] [/not-audio_url]

Duration: 5:13
Foundations of Amateur Radio We tend to spend most of our energy looking at antennas and power to evaluate how well our station works. Based on a better antenna or more power, you're likely to make more contacts is the g…
How to select a mobile operating location [not-audio_url] [/not-audio_url]

Duration: 5:04
Foundations of Amateur Radio Operating your amateur radio station at home, in your shack, is one of the often discussed aspects of our hobby. Much has been said about installation, antennas, grounding and the like, but w…
Brand New Callsign [not-audio_url] [/not-audio_url]

Duration: 4:17
Foundations of Amateur Radio Today I have a new callsign, it's exciting, special, kind of strange, to be known as something other than VK6FLAB. It's hard to overstate how much of your identity as a radio amateur is linke…
The reported death of Amateur Radio due to FT8 is an exaggeration [not-audio_url] [/not-audio_url]

Duration: 5:33
Foundations of Amateur Radio In 2017 a new digital amateur mode called FT8 joined the ranks of inventions related to our hobby. Since then it's taken the amateur world by storm, filled the bands with contacts and attract…
Fan Vertical Antenna [not-audio_url] [/not-audio_url]

Duration: 4:25
Foundations of Amateur Radio One of the single most recurring topics within our community is that of antennas. Everywhere you look is a story or a photo or a website or a contact about an antenna that came into being bec…
Empirical evidence and the scientific method [not-audio_url] [/not-audio_url]

Duration: 4:18
Foundations of Amateur Radio The hobby of amateur radio is a curious animal. It sits at the junction between empirical evidence and the scientific method. On the one hand it's all about physics, electricity, magnetism an…